BNG-2013 / BNG-2010 / BNG-2009

Accessories

Standard nosepiece

Standard nosepieces are the cost efficient alternative towards security nosepieces. Even though they do not have the same advantages e.g. preventing mandrels of falling out of the nosepiece.


 

Order-no. Description
HST-M*-18 Nosepiece for max. mandrel diameter 1.8 mm
HST-M*-20 Nosepiece for max. mandrel diameter 2.0 mm
HST-M*-24 Nosepiece for max. mandrel diameter 2.4 mm
HST-M*-27 Nosepiece for max. mandrel diameter 2.7 mm
HST-M*-29 Nosepiece for max. mandrel diameter 2.9 mm
HST-M*-36 Nosepiece for max. mandrel diameter 3.6 mm
HST-M*-40 Nosepiece for max. mandrel diameter 4.0 mm
HST-M*-45 Nosepiece for max. mandrel diameter 4.5 mm

 



Security nosepieces

The patented system of security nosepieces is optimally suited for vertical riveting or for difficult to reach places since the rivet is held in the nosepiece. The mandrel cannot fall into the workpiece after the rivet setting process.

The security nosepiece holds the mandrel tight and secures the workpiece against damage and soiling. This way you can set rivets with just one hand and guarantee occupational safety.


 

Order-no. Description
HST-FHM*-18 Security nosepiece for max. mandrel diameter 1.8 mm
HST-FHM*-20 Security nosepiece for max. mandrel diameter 2.0 mm
HST-FHM*-24 Security nosepiece for max. mandrel diameter 2.4 mm
HST-FHM*-27 Security nosepiece for max. mandrel diameter 2.7 mm
HST-FHM*-29 Security nosepiece for max. mandrel diameter 2.9 mm
HST-FHM*-36 Security nosepiece for max. mandrel diameter 3.6 mm
HST-FHM*-40 Security nosepiece for max. mandrel diameter 4.0 mm
HST-FHM*-45 Security nosepiece for max. mandrel diameter 4.5 mm

 



Standard pulling unit

The standard pulling unit is also available in extensions of 60, 85, 125 and 155 mm. This pulling unit was replaced by the new fast exchange system (Zug-Fx). The new system speeds up the change and cleaning time of wear parts.


 

Order-no. Description
ZUG-25** Pulling unit length 25 mm
ZUG-60** Pulling unit length 60 mm
ZUG-85** Pulling unit length 85 mm
ZUG-125** Pulling unit length 125 mm
ZUG-155** Pulling unit length 155 mm

 



Fast exchange system

Available in the extensions 60-155 mm. The new fast exchange system is compatible with all HS-Technik BNG and PowerRiv® blind rivet setting tools. Thanks to its innovative design, the chuck jaws (green) can be exchanged without any tools in just a few minutes or removed for cleaning. This saves part of the set-up and service costs.

If the chuck housing is mounted correctly, it cannot loosen itself due to vibrations from the tool, another plus for the proper operation and quality of the blind rivets set. There is a video about this innovation on our YouTube channel: www.youtube.de/user/HighSystemTechnik


 

Order-no. Description
ZUG-FX***-60 Pulling unit fast exchange system length 60 mm
ZUG-FX***-85 Pulling unit fast exchange system length 85 mm
ZUG-FX***-125 Pulling unit fast exchange system length 125 mm
ZUG-FX***-155 Pulling unit fast exchange system length 155 mm

 



Compression bushings

A compatible compression bushing for each extension of a blind rivet setting tool is available. The compression bushing reduces the shaft diameter to prevent that blind rivets with a mandrel diameter of less 3,2 mm jam the tools regular bushing.


 

Order-no. Description
BNG-2010-M07-
2A-25
Compression bushing for standard pulling unit / extension 25 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 1,8 - 2,4 mm
BNG-2010-M07-
3A-25
Compression bushing for standard pulling unit / extension 25 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 2,7 - 3,2 mm
BNG-2010-M07-
2B-60
Compression bushing for fast exchange system / extension 60 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 1,8 - 2,4 mm
BNG-2010-M07-
3B-60
Compression bushing for fast exchange system / extension 60 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 2,7 - 3,2 mm
BNG-2010-M07-
2C-85
Compression bushing for fast exchange system / extension 85 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 1,8 - 2,4 mm
BNG-2010-M07-
3C-85
Compression bushing for fast exchange system / extension 85 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 2,7 - 3,2 mm
BNG-2010-M07-
2D-125
Compression bushing for fast exchange system / extension 125 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 1,8 - 2,4 mm
BNG-2010-M07-
3D-125
Compression bushing for fast exchange system / extension 125 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 2,7 - 3,2 mm
BNG-2010-M07-
2E-155
Compression bushing for fast exchange system / extension 155 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 1,8 - 2,4 mm
BNG-2010-M07-
3E-155
Compression bushing for fast exchange system / extension 155 mm
Required if the nosepiece that matches to blind rivet which have a max. mandrel diameter of 2,7 - 3,2 mm

 

  



Download
Warranty terms
Warranty Terms.pdf
Adobe Acrobat Document 242.0 KB

View our latest catalog.

Open catalog

Contact

HS-Technik GmbH

Im Martelacker 12

79588 Efringen-Kirchen

GERMANY

Phone:
+49 (0)7628/9111-0
Fax: +49 (0)7628/9111-90
E-Mail: info@hs-technik.com
Web: www.hs-technik.com