TorqBee®  SO-series

Programmable screwdriver with shut-off clutch with extended functionality

  • Precision shut-off clutch 
  • Torque repetition accuracy +/- 10%
    Cmk > 1,67 | Cm > 2
  • Programmable in 6 steps
    - Current (Torque)
    - Angle
    - rpm
    - Time
  • Handle vibration alarm 
  • Multi color LED indication 
  • Intelligent battery management 
  • Brushless high-powered motor 
  • Display of tightening results 
  • Energy recovery of the braking energy extending the battery lifetime 
  • Maximum of ergonomic 
  • LED lighting of the working area 
  • Updates can be done through the USB 
  • OLED-Display 
  • Screw counter 
  • Memory-Function 
  • 100 individual programs 
  • Optional Barcode & Wi-Fi


Pistol screwdriver

Angle screwdriver

Straight screwdriver




Premium Power Tools

This claim is more than fulfilled by the easy-to-use, high-performance cordless screwdriver. With a USB interface integrated into the foot of the tool, the TorqBee® pistol screwdriver (0.8 - 14 Nm) and angle screwdriver (1.5 - 85 Nm) can be programmed freely in 99 programs.

The user-friendly HST-Tool-Manager programming software guarantees quick and easy programming of the tools for the required situation. The screwing procedure, torque and angle control are selected in the HST-Tool-Manager.

The TorqSpeed (TS) screwing function, which has been registered for a patent, optimizes the process time; no other tool is more efficient.



Quality assurance

Thanks to a multi-stage tightening, required preload force and the desired clamping force in the connection are always achieved. In most cases, the multi-stage process allows compensation or elimination of subsidence.

The screwdriver can be programmed with reference values for the process. If the specified current / angle / rpm / time reference value is not adhered to, the fastening procedure is evaluated as NOK, and this is indicated visually on the display (red and audible signal = NOK,

green = OK)

(direct information to the operator).

At the Light version the status will be shown via a mutli color LED control light. An integrated screw counter guarantees that all screws are fastened.



Torque-speed-regulation

The advantages of this fastening procedure is that the screwing time is reduced by up to 50% as compared to a standard two-stage tightening.

The screwing parameters adjust themselves dynamically to the type of joint. The power consumption is lower than that of a two-stage tightening since no stop and restart, braking and starting power is required.

Thanks to the ergonomic and force-optimized fastening procedure, the efficiency is increased significantly. The large, bright OLED display indicates the status of the tool at all times.

Unique on the market, the display indicates the battery status, the process results, as well as plain text and symbol displays for worker guidance and information.


Angle heads

Compatible angle heads for the TorqBee® series you´ll find here.



Identical design, identical batteries

A significant advantage of the TorqBee® series is that all tools starting from Light up to EC2 version have the identical design.



Technical Data

Pistol screwdriver
Torque Speed max.
 Adapter

Dimensions in mm

Weight in kg

TBPSO-4*

1.0 - 4.0 Nm

(8.85 - 35.40 lbf in)

1.400 rpm
1/4" - Form E

230 x 72 x 211 mm

(9.06 x 2.83 x 8.30 in)

1.20 kg

(2.65 lbs)

TBPSO-6*

1.5 - 6.5 Nm

(13.28 - 57.53 lbf in)

1.100 rpm
1/4" - Form E

230 x 72 x 211 mm

(9.06 x 2.83 x 8.30 in)

1.25 kg

(2.65 lbs)

TBPSO-10*

1.5 - 9.0 Nm

(13.28 - 79.66 lbf in)

800 rpm
1/4" - Form E

230 x 72 x 211 mm

(9.06 x 2.83 x 8.30 in)
1.25 kg
(2.65 lbs)
TBPSO-12* 3.0 - 13.0 Nm
(26.55 - 115.06 lbf in)
550 rpm
1/4" - Form E

230 x 72 x 211 mm

(9.06 x 2.83 x 8.30 in)

1.25 kg

(2.65 lbs)

 

Special types are not considered in this listing.

Dimensions and weight indications without battery.

*

W = Wi-Fi option

B = Barcode reader option

WB = Wi-Fi & barcode reader option

Angle screwdriver
Torque Speed max.
Adapter

Dimensions in mm

Weight in kg

TBASO-10*-2 (1/4/8/10)

1.5 - 9.0 Nm

(13.28 - 79.66 lbf in)

750 rpm
1/4" square

440 x 72 x 94 mm

(17.32 x 2.83 x 3.70 in)

1.50 kg

(3.31 lbs)

TBASO-12*-3 2.5 - 12.0 Nm
(22.13 - 106.21 lbf in)
550 rpm
3/8'' square

455 x 72 x 94 mm

(17.91 x 2.83 x 3.70 in)

1.51 kg
(3.33 lbs)
TBASO-20*-3

5.0 - 20.0 Nm

(44.25 - 177.01 lbf in)

400 rpm
3/8' square

455 x 72 x 94 mm

(17.91 x 2.83 x 3.70 in)

1.51 kg
(3.33 lbs)
TBASO-30*-3 8.0 - 30.0 Nm
(70.81 - 265.52 lbf in)
240 rpm
3/8'' square

510 x 72 x 94 mm

(20.08 x 2.83 x 3.70 in)

2.50 kg

(5.51 lbs)

TBASO-55*-3 (5)

15.0 - 55.0 Nm

(132.76 - 486.79 lbf in)

140 rpm
3/8'' square

580 x 72 x 94 mm

(22.83 x 2.83 x 3.70 in)

3.00 kg

(6.61 lbs)

TBASO-85*-5 25.0 - 85.0 Nm
(221.27 - 752.31 lbf in)
100 rpm
1/2'' square

630 x 72 x 94 mm

(24.80 x 2.83 x 3.70 in)

3.50 kg

(7.72 lbs)

 

Special types are not considered in this listing.

Above 60 Nm, the tool must be operated with a suitable torque reaction arm!

Dimensions and weight indications without battery.

*

1 = 1/4" hex C

2= 1/4" square

3 = 3/8" square

4 = 1/4" hex E

5 = 1/2" square

8 = SW8

10 = SW10

Straight screwdriver
Torque Speed max.
Adapter

Dimensions in mm

Weight in kg

TBSSO-4*

1.0 - 4.0 Nm

(8.85 - 35.40 lbf in)

1.400 rpm
1/4" - Form E

410 x 72 x 94 mm

(16.14 x 2.83 x 3.70 in)

1.30 kg

(2.87 lbs)

TBSSO-6* 1.5 - 6.5 Nm
(13.28 - 57.53 lbf in)
1.100 rpm
1/4" - Form E

410 x 72 x 94 mm

(16.14 x 2.83 x 3.70 in)

1.30 kg

(2.87 lbs)

TBSSO-10*

1.5 - 9.0 Nm

(13.28 - 79.66 lbf in)

800 rpm
1/4" - Form E

410 x 72 x 94 mm

(16.14 x 2.83 x 3.70 in)

1.30 kg

(2.87 lbs)

TBSSO-12* 3.0 - 13.0 Nm
(26.55 - 115.06 lbf in)
550 rpm
1/4" - Form E

410 x 72 x 94 mm

(16.14 x 2.83 x 3.70 in)

1.30 kg

(2.87 lbs)

TBSSO-30* 8.0 - 30.0 Nm
(70.80 - 265.52 lbf in)
200 rpm
3/8" square

450 x 72 x 94 mm

(17.72 x 2.83 x 3.70 in)

2.20 kg
(4.85 lbs)
TBSSO-40* 10.0 - 40.0 Nm
(88.51 - 354.03 lbf in)
140 rpm
3/8" square

450 x 72 x 94 mm

(17.72 x 2.83 x 3.70 in)

2.20 kg

(4.85 lbs)

 

Special types are not considered in this listing.

Dimensions and weight indications without battery.

*

W = Wi-Fi option

B = Barcode reader option

WB = Wi-Fi & barcode reader option

 


Software - HST-Tool-Manager

The HST-Tool-Manager allows quick and easy adjustment of TorqBee® Power Tools. In addition to the general settings such as signal tones, LED indicators and monitoring settings, the process relevant parameters such as torque / angle of rotation / speed / time / number of screw levels / number of connections can be set with the HST-Tool-Manager.

 

Thereby all popular screwing strategies can be programmed. The settings are saved in the tool, but they can also be saved locally on a PC as backup. Furthermore, the HST-Tool-Manager offers a print function with which the settings can be printed and documented as a PDF.

More information about the program software you´ll find here.



Downloads

Download
Datasheet
Datenblatt Akkuschraubtechnik EN.pdf
Adobe Acrobat Document 5.1 MB
Download
Manual
2016-12-15 Manual TorqBee EN mail.pdf
Adobe Acrobat Document 3.1 MB
Download
Manual Software
2014-12-03 Bedienungsanleitung HST-Tool-
Adobe Acrobat Document 25.1 MB


Download
Warranty terms
Warranty Terms.pdf
Adobe Acrobat Document 242.0 KB

View our latest catalog.

Open catalog

Contact

HS-Technik GmbH

Im Martelacker 12

79588 Efringen-Kirchen

GERMANY

Phone:
+49 (0)7628/9111-0
Fax: +49 (0)7628/9111-90
E-Mail: info@hs-technik.com
Web: www.hs-technik.com