HDP-Serie

Torque test and checking

Features

  • Digital LCD display offers error-free reading
  • Battery operated thanks to built-in battery for 12 hours operating time
  • Great accuracy, better than ± 0.5 %
  • Peak value storage for determination of the maximum torque
  • High sampling rate allows exact measurement of the peak values 
  • Display regardless of direction of rotation 
  • Screwdriver blades can be changed easily 
  • Checking of the fastening or holding torque of previously-installed screws 
  • Checking and adjustment of electrical screwdrivers thanks to comparison test 
  • Bit adapter 1/4“ 
  • Handle with integrated

Technical data

Model HDP-5***
HDP-50***
HDP-100***
Torque range Nm* 0.015 - 0.5 0.15 - 5.0 0.15 - 10.0
Accuracy* ± 0.5 % ± 0.5 % ± 0.5 %
Bit adapter 1/4“ hex 1/4“ hex 1/4“ hex
Charger input 100 - 240 V AC (50/60 Hz) 100 - 240 V AC (50/60 Hz) 100 - 240 V AC (50/60 Hz)
Power supply 1000mA 5 x 1.2 V Ni-MH battery 5 x 1.2 V Ni-MH battery 5 x 1.2 V Ni-MH battery
Charging time max. 8 h** max. 8 h** max. 8 h**
Operating time 12 h** 12 h** 12 h**
Battery life span** 300 charging cycles 300 charging cycles 300 charging cycles
Cable length 1.7 m*
1.7 m*
1.7 m*
Weight display / sensor 780 g / 68 g
780 g / 250 g
780 g / 250 g

 

* The load may not exceed the measurement range
** Since the battery life depends on the working conditions, it cannot be guaranteed
*** The device consists of a portable display and an adapter for screw use similar to a screwdriver.
The adapter includes a resistance strain gauge bridge connection and is connected permanently to the display with a cable.