HP-Series

Torque test and checking

Features

  • Accuracy ± 0.5 %
  • Peak value storage for determination of the maximum torque
  • High sampling rate allows exact measurement of quick peak values
  • Display depends on the direction of rotation
  • Robust construction and easy operation 
  • Storage capacity for 100 measurement values
  • With RS-232-C interface
  • Fidaptors up to 10Nm available
  • Digital LCD display offers error-free reading
  • Battery operated thanks to built-in battery for 8 hours operating time
  • The test unit serves preferably the determination or specification of the torque for mechanical screwdrivers with torque limitation or the determination of the torque required for thread cutting
  • With suitable material tests, the optimal screw connection can be determined experimentally by specifying the tightening and breakaway torque and the torque is in creased finally until the threads pull out
  • The device is portable and battery-driven, however it can also be mounted on a vertical or horizontal plate with 2 knurled screws.

Technical data

Model HP-10***
HP-100***
Torque range Nm* 0.015 - 1.0 0.15 - 10.0
Accuracy* ± 0.5 % ± 0.5 %
Charger input 100 - 240 V AC (50/60 Hz) 100 - 240 V AC (50/60 Hz)
Charger output DC 7.3 - 8.0 V DC (0.5 A) DC 7.3 - 8.0 V DC (0.5 A)
Storage capacity 100 measurement values 100 measurement values
Interface RS-232-C RS-232-C
Power supply 1000mA 5 x 1.2 V Ni-MH battery 5 x 1.2 V Ni-MH battery
Charging time: 6 h** 6 h**
Operating time 8 h** 8 h**
Battery life span** 300 charging cycles 300 charging cycles
Weight 1.8 kg 1.8 kg

 

* The load may not exceed the measurement range
** Since the battery life depends on the working conditions, it cannot be guaranteed
*** Included in the scope of delivery: charger, carrying case, Fidaptors

Fidaptor (screw case simulator)

 

Model Nm
Drive
Spring
TF4G-Z 0.15 - 0.6 HIOS ø4 yellow
TF5G-Z 0.5 - 3.0 HIOS ø5 black
TF6XG-Z 0.5 - 3.0 hex, 5mm, 1/4“ black
TF6SG-Z 0.15 - 0.6 hex, 5mm, 1/4“ yellow
TF6U-Z 3.0 - 9.0 hex, 1/4“ black

 


DP-1 VR - Optional printer

Torque test devices that have a data output can use it to print the values recorded and perform statistical calculations. The printer has a simple statistics function. The thermo printer works quickly and quietly. Thanks to the good paper quality, the printout are also suited for long-term storage. Legible characters are printed. If necessary, data recorded can be transmitted via the RS-232-C

interface to a computer. A time-dependent reading in of the measurement data (clock function) is possible. Furthermore, the printer can record up to 9,999 pieces of data. The printing method is a thermo document print 8P/mm (384 dots). OK/NOK evaluation can also be adjusted.


Optional printer DP-1 VR
Print capacity in characters 6,500 (large), 12,000 (small)
Input interval 0,25 s; 1 s; 5 s; 30 s; 1 min; 30 min; 60 min
Battery usage duration 10 years (watch battery), 10,000 lines (Ni-MH)
Power supply Power supply 6 V; Battery: LR6 or Ni-MH

 

Datasheet
hp series datasheet.pdf
Adobe Acrobat Document 3.3 MB