Model |
HP-10*** |
HP-100*** |
Torque range Nm* | 0.015 - 1.0 | 0.15 - 10.0 |
Accuracy* | ± 0.5 % | ± 0.5 % |
Charger input | 100 - 240 V AC (50/60 Hz) | 100 - 240 V AC (50/60 Hz) |
Charger output | DC 7.3 - 8.0 V DC (0.5 A) | DC 7.3 - 8.0 V DC (0.5 A) |
Storage capacity | 100 measurement values | 100 measurement values |
Interface | RS-232-C | RS-232-C |
Power supply 1000mA | 5 x 1.2 V Ni-MH battery | 5 x 1.2 V Ni-MH battery |
Charging time: | 6 h** | 6 h** |
Operating time | 8 h** | 8 h** |
Battery life span** | 300 charging cycles | 300 charging cycles |
Weight | 1.8 kg | 1.8 kg |
* The load may not exceed the measurement range
** Since the battery life depends on the working conditions, it cannot be guaranteed
*** Included in the scope of delivery: charger, carrying case, Fidaptors
Model |
Nm |
Drive |
Spring |
TF4G-Z | 0.15 - 0.6 | HIOS ø4 | yellow |
TF5G-Z | 0.5 - 3.0 | HIOS ø5 | black |
TF6XG-Z | 0.5 - 3.0 | hex, 5mm, 1/4“ | black |
TF6SG-Z | 0.15 - 0.6 | hex, 5mm, 1/4“ | yellow |
TF6U-Z | 3.0 - 9.0 | hex, 1/4“ | black |
Torque test devices that have a data output can use it to print the values recorded and perform statistical calculations. The printer has a simple statistics function. The thermo printer works quickly and quietly. Thanks to the good paper quality, the printout are also suited for long-term storage. Legible characters are printed. If necessary, data recorded can be transmitted via the RS-232-C
interface to a computer. A time-dependent reading in of the measurement data (clock function) is possible. Furthermore, the printer can record up to 9,999 pieces of data. The printing method is a thermo document print 8P/mm (384 dots). OK/NOK evaluation can also be adjusted.
Optional printer | DP-1 VR |
Print capacity in characters | 6,500 (large), 12,000 (small) |
Input interval | 0,25 s; 1 s; 5 s; 30 s; 1 min; 30 min; 60 min |
Battery usage duration |
10 years (watch battery), 10,000 lines (Ni-MH) |
Power supply |
Power supply 6 V; Battery: LR6 or Ni-MH |